Don't blame the tires, get better shocks. Listings on tires are max only on psi and weight. Look at it as reloading between a win mod 70 and a rem700 in 308win. each 1 will have or like different powder, charge weight and bullet weight and manufacturer for best accuracy.. Just tune the tires for your vehicle and/or get different brand/tread type.
Tire pressures also are dependent upon type of tire, and it's construction.
A lot of the LT tires, made for 3/4 and 1 ton and up trucks, typically run tire pressures from about 65 psi and up. Putting that tire on a half ton truck is going to result in a very rough ride.
Not just number of plies, but type of and diameter of the cord. Sidewall and tread amount also.Tire load range rating and number of plies also factor into maximum tire pressures.
Discount Tire | Tires and Wheels for Sale | Online & In-Person
www.discounttire.com
Correct. There are a lot of factors of tire construction that determine tire pressures. Also intended usage of the tire matters as well.Not just number of plies, but type of and diameter of the cord. Sidewall and tread amount also.
On ford and dodge for sure with their suspension!Tire pressures also are dependent upon type of tire, and it's construction.
A lot of the LT tires, made for 3/4 and 1 ton and up trucks, typically run tire pressures from about 65 psi and up. Putting that tire on a half ton truck is going to result in a very rough ride.
I also think a person should choose a tire suited to the vehicle and the usage of that vehicle. Taking into consideration what is the best tire for that primary usage. I think many people simply choose a tire based upon size that fits and price.Check load index if you want the same brand/style tires and get D2 it has a lower max pressure of 50 instead of 65 on D1 both are 6 ply. C1 has max psi @ 50 and C2 at 35 and are 4 ply. Check with the tire company and check availability. Check load index between 100 to 120. That is what max tire support/carry/load weight is rated. Example 235/75 16 115H. 115 is the load rating and H is speed rating. If it has a R after the aspect ratio (75) it's a radial. Maybe this can answer your tire question an what you have on the p/u right now?
I second that!I also think a person should choose a tire suited to the vehicle and the usage of that vehicle. Taking into consideration what is the best tire for that primary usage. I think many people simply choose a tire based upon size that fits and price.
Absolutely. The tire placard that is usually inside the front door jamb area, also states the OEM rim size for reference along with the appropriate tires for that rim.Rim width is important! The tread and the rim should be about the same width, but the tread should never be wider than the rim. For the SAME tire, a narrower rim means less air to have a full contact patch. A wider rim needs more air pressure to get a full contact patch.
With the narrow rim the ride is soft and sloppy and the tread rolls over instead of biting the corner.
Wider rims give a firmer ride, and the treads bites in on corners, tires last longer due to less scrub, and you get better mileage.
That’s not disagreeing it’s just people not reading and screwing stuff up.Now many people will disregard that, and put the wrong size tires on rims, but many times I think it more about appearance, rather than function.
When the tires that are factory installed are D! and the door jam has suggested pressure of 35 I call bull shit! A 6 ply tire with 65psi max doesn't really fit a 1/2ton, but make it a selling/marketing point! Tire replacement will be on you and hopefully you get tires better suited for your vehicle? Getting a D2 (still a 6ply) and with a lower max pressure @ 50 you can run 35-40psi with good wear and ride. If you can get a C2 (4ply @ 35psi) it would be better on 1/2ton as far as ride goes. Knowing where the plies are located (sidewall vs tread) and having more on the tread than sidewall makes for a better ride, but stability is sacrificed some.That’s not disagreeing it’s just people not reading and screwing stuff up.
I know not of these wussy ply tires.When the tires that are factory installed are D! and the door jam has suggested pressure of 35 I call bull shit! A 6 ply tire with 65psi max doesn't really fit a 1/2ton, but make it a selling/marketing point! Tire replacement will be on you and hopefully you get tires better suited for your vehicle? Getting a D2 (still a 6ply) and with a lower max pressure @ 50 you can run 35-40psi with good wear and ride. If you can get a C2 (4ply @ 35psi) it would be better on 1/2ton as far as ride goes. Knowing where the plies are located (sidewall vs tread) and having more on the tread than sidewall makes for a better ride, but stability is sacrificed some.
I'll run 8ply on my dually and on the trailer, because 10ply are horrible (on the trailer) and short lived. 10ply on 2ton or heavier I understand.I know not of these wussy ply tires.
Had a big decking screw make love to my rear driver side tire. Having ten ply makes a difference.I'll run 8ply on my dually and on the trailer, because 10ply are horrible (on the trailer) and short lived. 10ply on 2ton or heavier I understand.
I have some bfg m/t (8 ply) that has had a nail stuck in the tire all summer and hasn't lost any air pressure yet.Had a big decking screw make love to my rear driver side tire. Having ten ply makes a difference.