I’m along the same line of thinking. Thanks!Have you seen them or seen reports on the internet? If you make sure your muzzle device, and mount are secure and the suppressor is concentric to the barrel by verifying with a rod, then you will be fine. Most baffle strikes are due to user error IMO.
Sent from my SM-G991U using Tapatalk
I’m not trying to argue with you about Surefire, but don’t rule out the M4SD II for $2-300 less.I have witnessed a few baffle strikes with DA cans. A wolverine, a sandman s (iirc) and a nomad i think. I think they aren't able to control the QC of their subcontractor. That and their inability to reliably stock certain adapters/mounts kills any interest i had. I did see a sierra 5 in a dealers case, brand new that had loose baffles.
I'll stick to surefire, literally the best all around performer for a GP 5.56 can. There's also YHM, OCM, AEM, etc
Eh. I'm not a huge fan of griffin. From dumb stuff like "front towards Arabs" to copying kac and threatening litigation over memes, i just don't see much value, though their cans aren't bad from what I've heard.I’m not trying to argue with you about Surefire, but don’t rule out the M4SD II for $2-300 less.
Surefire is good too.I have witnessed a few baffle strikes with DA cans. A wolverine, a sandman s (iirc) and a nomad i think. I think they aren't able to control the QC of their subcontractor. That and their inability to reliably stock certain adapters/mounts kills any interest i had. I did see a sierra 5 in a dealers case, brand new that had loose baffles.
I'll stick to surefire, literally the best all around performer for a GP 5.56 can. There's also YHM, OCM, AEM, etc
Evan may say some dumb stuff from time to time, but their cans are ROCK SOLID.Eh. I'm not a huge fan of griffin. From dumb stuff like "front towards Arabs" to copying kac and threatening litigation over memes, i just don't see much value, though their cans aren't bad from what I've heard.
Surefire predates the first terminator film and makes the most combat tested suppressor ever made.
I've messed with some Q cans, kb says some exceptionally dumb stuff, but some of their suppressors do sound quite nice, especially with subsonic roundsEvan may say some dumb stuff from time to time, but their cans are ROCK SOLID.
Unlike Q, who says dumb shit all the time, and cans aren’t really great.
Also, as I said, I’m not arguing about Surefire’s record or reputation.
Yeah, but so do a hundred other small companies without douchebag owners who will literally tell you to go F yourself, and will only charge you a fraction as much.…some of their suppressors do sound quite nice, especially with subsonic rounds
And have much better welds...Yeah, but so do a hundred other small companies without douchebag owners who will literally tell you to go F yourself, and will only charge you a fraction as much.
I’ve also seen the Pew Science report on it, and I’m about to listen to the podcast explaining the report to my monke brain lol. So far from what I see, this is an obvious yes.Capitol Armory is in your City, and has the OCL Polonium in stock for $200 less than the Sierra 5.
That's a no brainer for me.
I don't personally like p&w'ed or integral suppressors. It creates a headache if you want to change up the gun, or put the suppressor on something elseI’ve also seen the Pew Science report on it, and I’m about to listen to the podcast explaining the report to my monke brain lol. So far from what I see, this is an obvious yes.
Now second question, how stupid would it be to pin and weld a suppressor to an 11.5 considering its direct thread? I think kind of stupid because I’m already jumping through the hoops for a suppressor. From what I can tell, the wait times for an sbr are less.
OR get the keymo adapter for it and add to the length.
I mean, it sounds pretty stupid to me, but hey, it’s your gun and you should do what makes you happy.I’ve also seen the Pew Science report on it, and I’m about to listen to the podcast explaining the report to my monke brain lol. So far from what I see, this is an obvious yes.
Now second question, how stupid would it be to pin and weld a suppressor to an 11.5 considering its direct thread? I think kind of stupid because I’m already jumping through the hoops for a suppressor. From what I can tell, the wait times for an sbr are less.
OR get the keymo adapter for it and add to the length.
That is concerning that it could be the QC if their subcontractor.I have witnessed a few baffle strikes with DA cans. A wolverine, a sandman s (iirc) and a nomad i think. I think they aren't able to control the QC of their subcontractor. That and their inability to reliably stock certain adapters/mounts kills any interest i had. I did see a sierra 5 in a dealers case, brand new that had loose baffles.
I'll stick to surefire, literally the best all around performer for a GP 5.56 can. There's also YHM, OCM, AEM, etc
I don't buy for a second that all the s5 issues are user error or anomalies. The issues seem to involve all manner of mounting systems, and how would a user error cause blast baffles to have total weld failures? Disintegrating baffles? There are other issues with DA, like them being unable to support suppressors with adapters. How long did people have to wait for wolfman tri lug adapters or 26x1.5 wolverine adapters? It was far longer than DA said they'd be waiting.There's a lot of noise in here, but to distill it down to your question baffle strikes are not a "brand-related issue."
They are virtually all user error or unpreventable anomalies.
Some cans are more (or less) forgiving to user error, but it's extremely rare for the can to be at fault for a baffle strike. I can all but guarantee OCM cans will be the next one on the chopping block. Why you ask? Well.....
ASR is the best mounting system! ASR becomes the most popular, most new shooters own it, and boom issues.
HUSH ammo is the best! Hush becomes popular, new shooters buy it, and then they have cycling issues with their gun.
KeyMo is the best mount now! KeyMo becomes popular, new shooters think they need it, and boom problems come up.
Obsidian is the best pistol can ever! Obsidian becomes popular, new shooters buy it, boom end cap strike reports.
Dead Air is the best! Dead Air becomes popular, new shooters buy it, and boom problems happen.
OCM makes a great product, they become popular with new shooters, and.... well, we can come back to this point in a year or two.
The common issue is new shooters not knowing exactly what they are doing and buying the popular 'thing' on the internet. It doesn't really matter what the thing is. Virtually every time. Education on how something functions and how to properly utilize it would fix almost all the problems related to silencers.
For some reason in this industry everyone wants to argue and pick sides. AK, AR. Glock, 1911. 9, 45. 500, 870. The truth of the matter is there are a lot of great products, and a lot of great people-- and we love being opinionated as much as we love freedom.
Excellent reply. The sierra 5 was going to be my first suppresor, but I've since decided on the Polonium K with Keymo mount. I will definitely be getting it from y'all, thanks!There's a lot of noise in here, but to distill it down to your question baffle strikes are not a "brand-related issue."
They are virtually all user error or unpreventable anomalies.
Some cans are more (or less) forgiving to user error, but it's extremely rare for the can to be at fault for a baffle strike. I can all but guarantee OCM cans will be the next one on the chopping block. Why you ask? Well.....
ASR is the best mounting system! ASR becomes the most popular, most new shooters own it, and boom issues.
HUSH ammo is the best! Hush becomes popular, new shooters buy it, and then they have cycling issues with their gun.
KeyMo is the best mount now! KeyMo becomes popular, new shooters think they need it, and boom problems come up.
Obsidian is the best pistol can ever! Obsidian becomes popular, new shooters buy it, boom end cap strike reports.
Dead Air is the best! Dead Air becomes popular, new shooters buy it, and boom problems happen.
OCM makes a great product, they become popular with new shooters, and.... well, we can come back to this point in a year or two.
The common issue is new shooters not knowing exactly what they are doing and buying the popular 'thing' on the internet. It doesn't really matter what the thing is. Virtually every time. Education on how something functions and how to properly utilize it would fix almost all the problems related to silencers.
For some reason in this industry everyone wants to argue and pick sides. AK, AR. Glock, 1911. 9, 45. 500, 870. The truth of the matter is there are a lot of great products, and a lot of great people-- and we love being opinionated as much as we love freedom.