So i recently inherited a winchester 1906. In .22 short, long , and long rifle. Its in need of some TLC, to say the least. While I'm waiting on parts to get the bolt fixed, i need to sort out the fire control group.
Big problem is that when you cycle the action slowly, the hammer never resets. And when you quickly run the action, about 1/3rd of the time it doesn't reset.
I watched a dissassembly video, and ran through the FCG with a fine toothed comb, but i can't seem to figure it out.
All the parts LOOK ok, at least to me.
The gun does fire, or did before i took it apart, and the action can be opened both when hammer down and when cocked. I'm not sure if this is normal or not.
Big problem is that when you cycle the action slowly, the hammer never resets. And when you quickly run the action, about 1/3rd of the time it doesn't reset.
I watched a dissassembly video, and ran through the FCG with a fine toothed comb, but i can't seem to figure it out.
All the parts LOOK ok, at least to me.
The gun does fire, or did before i took it apart, and the action can be opened both when hammer down and when cocked. I'm not sure if this is normal or not.