UPDATED 4/21/10 WITH CORRECTIONS, UPDATES, AND PICTURES.
BONUS: I will add 10 witness hole magazines to anybody that buys this for full price and has funds in my hand (or PO box) by Thursday, April 22, 2010! I check my email regularly, email me your telephone number and I'll give you payment instructions!
FAL Starter Kit – add your receiver, some compliance parts, and go! I'm thinning my collection down, cleaning house, and eliminating debt. This is my FAL-related collection acquired over several years. I may add to this if I find more parts.
1. G-1 parts kit. Usual no finish, mismatched bolt and carrier, carried a LOT but shot little – bore looks good and doesn't appear to have any pits. This came to me as a pile of loose parts in a box. The best I can tell, it is complete EXCEPT the take-down lever is DAMAGED, it appears that somebody removed the plunger without removing the lever first. In addition, the recoil plunger and spring assembly and the magazine release screw are MISSING. The bipod is there, but is missing one plunger and spring assembly. No full-auto parts are included (auto-sear, elector block). There is a locking shoulder!
http://i44.tinypic.com/16ghmdv.jpg
http://i41.tinypic.com/34yqvya.jpg
http://i40.tinypic.com/2lwnlte.jpg
http://i42.tinypic.com/t5siom.jpg
2. Six magazines, varying condition, unknown manufacture. These are without witness holes.
http://i40.tinypic.com/2s7jbtl.jpg
http://i42.tinypic.com/xmubmc.jpg
3. Spare/extra parts:
3A. Three “Inch” bolt carriers
3B. One “Inch” bolt & carrier set
3C. Two sets used metal hand guards, with 1 screw
3D. Two sets synthetic surplus non-bipod-cut hand guards, with 2 screws
3E. One extra carry handle with 2 grips
3F. One top cover, painted, appears to be NS but might have storage wear.
http://i42.tinypic.com/1z6fn09.jpg
4. Aftermarket parts and accessories:
4A. One Buffer Tech recoil buffer.
4B. Leapers (FAC) scope mounts – 2 appear NIB, rail type. One has scope rings.
4C. One square “T48” type trigger guard
4D. Springs, appears to be one complete set and one partial.
http://i42.tinypic.com/sywhax.jpg
http://i44.tinypic.com/34y33a9.jpg
5. Compliance parts:
5A. US made (Tapco) gas piston.
5B. Mountainman US-made folding cocking handle assembly.
5C. Two unassembled US-made buttstocks
5D. Two US-made grips with Hogue wrap-around pad.
5E. One US-made standard synthetic grip.
5F. One US-made all-plastic fore end.
http://i39.tinypic.com/2vt6zvo.jpg
http://i44.tinypic.com/qoa71h.jpg
6. Surplus furniture:
6A. Five probably South African synthetic butt stocks, 1 has a sling swivel.
6B. Four probably South African synthetic pistol grips.
6C. Two “StG-58” butt stocks.
6D. Five “standard” butt pads
6E. Four “StG-58” butt pads
6F. Four surplus synthetic pistol grips.
http://i41.tinypic.com/dcufbd.jpg
http://i41.tinypic.com/s153ck.jpg
http://i39.tinypic.com/mv2iqx.jpg
http://i40.tinypic.com/2vkyip2.jpg
http://i43.tinypic.com/2efi8a8.jpg
http://i40.tinypic.com/xonu2t.jpg
http://i39.tinypic.com/oi50r5.jpg
7. Two surplus magazine pouches, leather type, in pretty good shape. I think these are pig skin or I'd keep them!
http://i40.tinypic.com/23h0qop.jpg
I'm asking $750 shipped for the lot, or $700 FTF in the Houston area. Payment by cash if FTF or USPS Money Order if shipped. Please email me directly, ani.eliyahu@gmail.com for any questions.
MAKE OFFERS – I need to move this ASAP so realistic offers will be entertained!
Thanks for looking!
Eli
BONUS: I will add 10 witness hole magazines to anybody that buys this for full price and has funds in my hand (or PO box) by Thursday, April 22, 2010! I check my email regularly, email me your telephone number and I'll give you payment instructions!
FAL Starter Kit – add your receiver, some compliance parts, and go! I'm thinning my collection down, cleaning house, and eliminating debt. This is my FAL-related collection acquired over several years. I may add to this if I find more parts.
1. G-1 parts kit. Usual no finish, mismatched bolt and carrier, carried a LOT but shot little – bore looks good and doesn't appear to have any pits. This came to me as a pile of loose parts in a box. The best I can tell, it is complete EXCEPT the take-down lever is DAMAGED, it appears that somebody removed the plunger without removing the lever first. In addition, the recoil plunger and spring assembly and the magazine release screw are MISSING. The bipod is there, but is missing one plunger and spring assembly. No full-auto parts are included (auto-sear, elector block). There is a locking shoulder!
http://i44.tinypic.com/16ghmdv.jpg
http://i41.tinypic.com/34yqvya.jpg
http://i40.tinypic.com/2lwnlte.jpg
http://i42.tinypic.com/t5siom.jpg
2. Six magazines, varying condition, unknown manufacture. These are without witness holes.
http://i40.tinypic.com/2s7jbtl.jpg
http://i42.tinypic.com/xmubmc.jpg
3. Spare/extra parts:
3A. Three “Inch” bolt carriers
3B. One “Inch” bolt & carrier set
3C. Two sets used metal hand guards, with 1 screw
3D. Two sets synthetic surplus non-bipod-cut hand guards, with 2 screws
3E. One extra carry handle with 2 grips
3F. One top cover, painted, appears to be NS but might have storage wear.
http://i42.tinypic.com/1z6fn09.jpg
4. Aftermarket parts and accessories:
4A. One Buffer Tech recoil buffer.
4B. Leapers (FAC) scope mounts – 2 appear NIB, rail type. One has scope rings.
4C. One square “T48” type trigger guard
4D. Springs, appears to be one complete set and one partial.
http://i42.tinypic.com/sywhax.jpg
http://i44.tinypic.com/34y33a9.jpg
5. Compliance parts:
5A. US made (Tapco) gas piston.
5B. Mountainman US-made folding cocking handle assembly.
5C. Two unassembled US-made buttstocks
5D. Two US-made grips with Hogue wrap-around pad.
5E. One US-made standard synthetic grip.
5F. One US-made all-plastic fore end.
http://i39.tinypic.com/2vt6zvo.jpg
http://i44.tinypic.com/qoa71h.jpg
6. Surplus furniture:
6A. Five probably South African synthetic butt stocks, 1 has a sling swivel.
6B. Four probably South African synthetic pistol grips.
6C. Two “StG-58” butt stocks.
6D. Five “standard” butt pads
6E. Four “StG-58” butt pads
6F. Four surplus synthetic pistol grips.
http://i41.tinypic.com/dcufbd.jpg
http://i41.tinypic.com/s153ck.jpg
http://i39.tinypic.com/mv2iqx.jpg
http://i40.tinypic.com/2vkyip2.jpg
http://i43.tinypic.com/2efi8a8.jpg
http://i40.tinypic.com/xonu2t.jpg
http://i39.tinypic.com/oi50r5.jpg
7. Two surplus magazine pouches, leather type, in pretty good shape. I think these are pig skin or I'd keep them!
http://i40.tinypic.com/23h0qop.jpg
I'm asking $750 shipped for the lot, or $700 FTF in the Houston area. Payment by cash if FTF or USPS Money Order if shipped. Please email me directly, ani.eliyahu@gmail.com for any questions.
MAKE OFFERS – I need to move this ASAP so realistic offers will be entertained!
Thanks for looking!
Eli
