I have two NIB Complete PSA Uppers I would like to sell as a set.
1) 8.5" Pistol Length 300ACC Blackout 1/8 phosphate lightweight M-LOK Upper w/ Bolt Carrier Group and Charging Handle
Barrel: Chambered in 300AAC Blackout with a 1:8 twist rate, M4 barrel extension, and a pistol gas system. This barrel features a phosphate finish for accuracy and durability. It is finished off with a PSA 7" Lightweight M-Lok rail, .750" diameter low profile gas block, and an A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for PSA in the USA by a mil-spec manufacturer.
Bolt: Bolt is made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec.
Each upper is assembled to order with care, and test fired.
2) GEN4 8" 9mm 1/10 Nitride 7" lightweight M-LOK Upper w/ Bolt Carrier Group and Charging Handle
Barrel: 8" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 7" Lightweight M-Lok free-float rail and a 9mm birdcage flash hider.
Upper: Billet 7075-T6 A3 AR upper is hard coat anodized black for durability. These slick side upper receivers are made for us right here in the USA.
Bolt Carrier Group: Gen 4 Hybrid 9mm BCG. Nitride treated 8620 steel, with an enhanced firing pin and external 5.56 style extractor. The bolt carrier group is compatible with most aftermarket fire control groups.
Both are Unused New In Box
Both have removable muzzle devices
$600 cash for both or interesting trades
Face-to-face transaction
Thanks for looking
1) 8.5" Pistol Length 300ACC Blackout 1/8 phosphate lightweight M-LOK Upper w/ Bolt Carrier Group and Charging Handle
Barrel: Chambered in 300AAC Blackout with a 1:8 twist rate, M4 barrel extension, and a pistol gas system. This barrel features a phosphate finish for accuracy and durability. It is finished off with a PSA 7" Lightweight M-Lok rail, .750" diameter low profile gas block, and an A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for PSA in the USA by a mil-spec manufacturer.
Bolt: Bolt is made of Mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec.
Each upper is assembled to order with care, and test fired.
2) GEN4 8" 9mm 1/10 Nitride 7" lightweight M-LOK Upper w/ Bolt Carrier Group and Charging Handle
Barrel: 8" chrome moly steel barrel. Chambered in 9mm, (9x19), with a 1/10 twist. The barrel is nitride treated for durability and finished off with a Palmetto State Armory 7" Lightweight M-Lok free-float rail and a 9mm birdcage flash hider.
Upper: Billet 7075-T6 A3 AR upper is hard coat anodized black for durability. These slick side upper receivers are made for us right here in the USA.
Bolt Carrier Group: Gen 4 Hybrid 9mm BCG. Nitride treated 8620 steel, with an enhanced firing pin and external 5.56 style extractor. The bolt carrier group is compatible with most aftermarket fire control groups.
Both are Unused New In Box
Both have removable muzzle devices
$600 cash for both or interesting trades
Face-to-face transaction
Thanks for looking
Last edited: