Hello Everyone,
My name is Jonathan of Titan Armament Corporation.
My company will begin teaching an AR15 certified armorers course through out the DFW. Our armorers course is a two day 16 hr comprehensive tour of the AR15 platform. Upon completion of this course you will have the knowledge and skills necessary to properly assemble, disassemble, re-barrel an AR15 as well as perform routine inspections and maintenance. You will also know the fundamentals of the platform such as the cycle of operation and lifespan of components.
[FONT=helvetica, arial, sans-serif]
Here are some more topics that we cover in our AR15 Certified Armorers Course:[/FONT]
-History of the platform
-Definition of Mil-Spec/TDP
-Anatomy of the platform
-Anatomy and importance of a barrel
-Rifle tuning
-Maintenance
-Materials &Finishes
-Common Misconceptions
-Q&A session
-Comparison of commercial components vs True Mil-spec
-Muzzle devices
-Aftermarket accessories
and much much more.
I have been in the industry since 2010 and I am a Certified Armorer for the AR15 and have been taught by:
Will Larson- Semper Paratus Arms. Former Armorer for BCM, Blackwater and may other Private security companies
Joey Boswell - founder of War Sport Industries
George Huang- founder of Battle Arms Development
Anibal Salinas- Weapon Armament Research, creator of the Super Woody
Jayden Jung- VG6 precision
John Hwang- Rainier Arms
Roger Wang- Forward controls design
Our Armorers program is sponsored by:
Aero Precision
Vg6 Precision
Ballistic Advantage
Trijicon
B.E. Meyers
Kns Precision
B5 Systems
Forward Controls Design
Hexmag
Our first class will be held at
EAGLE GUN RANGE:
491 W Valley Ridge Blvd.
Lewisville, TX 75057
Fee:
$215
What you will need:
an AR15
or
all components necessary to assemble a full rifle during the course.
[FONT]-Complete set of flat steel punches (Starrett Pin Punch set recommended)
1/16, 5/64, 3/32, 1/8, 5/32
[FONT]-Complete set of roll pin holders (starter punches)[/FONT]
[FONT]-Complete set of roll pin punches[/FONT]
[FONT]-1″ Nylon and Brass Gunsmithing Hammer[/FONT]
[FONT]-Small to medium pair of needle nose pliers.[/FONT]
[FONT]-Large flat tip screwdriver or variable tip screwdriver set.[/FONT]
[FONT]-Bolt Catch Pin Punch- http://www.brownells.com/gunsmith-t...bly-tools/bolt-catch-pin-punch-prod26484.aspx[/FONT]
[FONT]-Pivot Pin Installation Tool- http://www.brownells.com/gunsmith-t...t-pin-detent-installation-tool-prod26488.aspx[/FONT]
[h=3] Minimalist Tool List (From Brownells.com)[/h][FONT]Glock Disassembly Tool
Nylon and Brass gun smithing hammer. (1″) Part# 818-600-100WB
6″ flat tip screwdriver or correct allen wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Notepad/Paper
USB Flash Drive
12 Spots available
Reservations must be made @
http://weaponanatomy.mysimplestore.com/products/ar15-armorers-course
before the date of the course.
If anyone has any questions you can reach me at: titanarmamentcorporation@gmail.com
Thank you.[/FONT]
[/FONT]
My name is Jonathan of Titan Armament Corporation.
My company will begin teaching an AR15 certified armorers course through out the DFW. Our armorers course is a two day 16 hr comprehensive tour of the AR15 platform. Upon completion of this course you will have the knowledge and skills necessary to properly assemble, disassemble, re-barrel an AR15 as well as perform routine inspections and maintenance. You will also know the fundamentals of the platform such as the cycle of operation and lifespan of components.
[FONT=helvetica, arial, sans-serif]
Here are some more topics that we cover in our AR15 Certified Armorers Course:[/FONT]
-History of the platform
-Definition of Mil-Spec/TDP
-Anatomy of the platform
-Anatomy and importance of a barrel
-Rifle tuning
-Maintenance
-Materials &Finishes
-Common Misconceptions
-Q&A session
-Comparison of commercial components vs True Mil-spec
-Muzzle devices
-Aftermarket accessories
and much much more.
I have been in the industry since 2010 and I am a Certified Armorer for the AR15 and have been taught by:
Will Larson- Semper Paratus Arms. Former Armorer for BCM, Blackwater and may other Private security companies
Joey Boswell - founder of War Sport Industries
George Huang- founder of Battle Arms Development
Anibal Salinas- Weapon Armament Research, creator of the Super Woody
Jayden Jung- VG6 precision
John Hwang- Rainier Arms
Roger Wang- Forward controls design
Our Armorers program is sponsored by:
Aero Precision
Vg6 Precision
Ballistic Advantage
Trijicon
B.E. Meyers
Kns Precision
B5 Systems
Forward Controls Design
Hexmag
Our first class will be held at
EAGLE GUN RANGE:
491 W Valley Ridge Blvd.
Lewisville, TX 75057
Fee:
$215
What you will need:
an AR15
or
all components necessary to assemble a full rifle during the course.
[FONT]-Complete set of flat steel punches (Starrett Pin Punch set recommended)
1/16, 5/64, 3/32, 1/8, 5/32
[FONT]-Complete set of roll pin holders (starter punches)[/FONT]
[FONT]-Complete set of roll pin punches[/FONT]
[FONT]-1″ Nylon and Brass Gunsmithing Hammer[/FONT]
[FONT]-Small to medium pair of needle nose pliers.[/FONT]
[FONT]-Large flat tip screwdriver or variable tip screwdriver set.[/FONT]
[FONT]-Bolt Catch Pin Punch- http://www.brownells.com/gunsmith-t...bly-tools/bolt-catch-pin-punch-prod26484.aspx[/FONT]
[FONT]-Pivot Pin Installation Tool- http://www.brownells.com/gunsmith-t...t-pin-detent-installation-tool-prod26488.aspx[/FONT]
[h=3] Minimalist Tool List (From Brownells.com)[/h][FONT]Glock Disassembly Tool
Nylon and Brass gun smithing hammer. (1″) Part# 818-600-100WB
6″ flat tip screwdriver or correct allen wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Notepad/Paper
USB Flash Drive
12 Spots available
Reservations must be made @
http://weaponanatomy.mysimplestore.com/products/ar15-armorers-course
before the date of the course.
If anyone has any questions you can reach me at: titanarmamentcorporation@gmail.com
Thank you.[/FONT]
[/FONT]
