Springfield xd load data

[bryonbush]

okay fellas, i need load data for my springfield xd .40. here is my info on what im using.

Lee 401-175-TC bullet mould.
i was using 4 gr of titegroup but now have a bunch of bullseye.
using lee liquid alox tumble lubed.

any one got a solution for a load that wont lead up the barrel?

also, is there anyone in the East Dallas/Mesquite area that has a chrono or know of a place that has one so i could see the velocity of my loads?

 

[TxSgt1911]

I've used 4.0 gr of Titegroup and 4.3 gr of Bullseye with a 175 gr LSWC for approx. 900 fps. I get better results with Titegroup, YMMV.

 

[PopsXD9sc]

3.8 gr of WST or 4.0 gr of W231 work well in my XDM. Using Bayou Bullets at 180 gr and this is a light recoil that is used for either USPSA production or IDPA ESP class. I haven't had trouble with leading in any of my XD's from 9mm to .45 using Missouri Bullets or Bayou Bullets (sort of a moly coated bullet). Good luck in developing a load that works in your gun.

 

[AusTex]

I would look at win 540. very clean. Just remember to keep the velocity down and leading will be less of an issue.