The safety on the right side of my slide is becoming loose from repeated use. I worry that it will eventually come off when I attempt to disengage it. What is the easiest way to replace this part?
PFC, if it similar to the last model that I was duracoating, that is the safety lever that slides into the end of the safety that is inserted from the other side of the slide and then has two small pins that hold it in place. You can take the slide off the gun and get access to the pins from the underside of the slide. Check and see if one of the pins has come out or is loose. You can find replacement pins or make them from a couple small nails. Also, be careful if you remove the safety from the slide, there are a couple detents under pressure that like to shoot out and get lost!