Let's see your targets and groups!

[TXShooter66]

Brand New Rifle. Now to find the right ammo...

 

[FireInTheWire]

Hadn't shot the .243 since spring. Had a 5mph 2clock wind this evening. Thought I'd scratch the itch. Hornady 58g about 4000fps. Steel yote @365yrds. Last I remembered, I needed to hold just a tad high. 10rds.... first 5 over the top. Then I realized it was shooting where I pointed.

Makes me want a Wilson .243 AR10 platform

 

[mnpshooter]

This was my first six rounds through my new Ruger 556 at 25yds with irons.

 

[TexMex247]

Decided to brave the heat this last weekend to shoot these. Shot with a stock anderson predator and a decent burris scope. Hit a sweetspot with my reloads and put 10 about a second or two apart in a sub moa group. The other groups were 1 1/4"-ish from the lighter loads. From the bench right at 101 yards. Working with a 62gr Hornady SPBT bullet and tac rifle powder.

 

[txgirliegirl]

okay so probably not impressive to this group but i was pretty proud of this ...first 10 shots through my walther ppq m2 at either 3 or 5 yards (i forget which) .... the center shots are mine and the head shots are my friend’s (a guy!)

 

[jrbfishn]

6 on the money.
And TxOMFS is gigling over the money he will make on the other 4.

Sent by an idjit coffeeholic from my SM-G892A using Tapatalk

 

[FireInTheWire]

Hornady black 62g fmj 223

800yrds

400yrds

360yrds

Sent from my SM-G935V using Tapatalk

 

[cvgunman]

I went to the new range in Allen, Texas Legends. Quaint little place, and nobody there. Ended up picking 5 pistols to shoot, one of which I will use for CHL qual.
I'm thinking the grouping on top right was best. Bottom right was with a "jam-o-matic".

 

[FireInTheWire]

Really impressed with this rifle. Savage Elite. 223

Hornady black 62g.

POA was all on the 4"x4" head shot. 792yrds

First shot was dead center. Rest were good in my book. Wind call was 3 o clock @ 9mph.

Only tried 13... landed 5. All misses were wind

 

[dee]

6mm bra at 100yds then 5 at 500yds and 4 at 900yds.

Sent from my SM-G965U using Tapatalk

 

[sucker76]

Damn good shootin!

 

[Coop45]

My boolits are still social distancing.

 

[TexMex247]

Dee what's your setup on that 6mm rifle? Optic, rifle, barrel maker, etc. Also what's the typical barrel life out of a 6mm?

 

[dee]

Dee what's your setup on that 6mm rifle? Optic, rifle, barrel maker, etc. Also what's the typical barrel life out of a 6mm?

It's a bighorn tl3 action with a bartlien 7 twist barrel finished at 28" sitting in a mdt acc chassis. Running a jewel trigger and a schmidt and bender pmii scope. Not sure what barrel life will be but I suspect somewhere in the 2500-3000rds. Its only running 30gr of varget which pushes the 110's at 2807fps. Here's a pic of the kiddo with it dry firing before she started running it.

Sent from my SM-G965U using Tapatalk

 

[TexMex247]

Amazing accuracy. Knew it had to be a quality build out. Thanks for sharing.

 

[OneGunTX]

Mounted a delta point pro to a M&P performance center M2.0 and sighted it in at 10 yards to start.

I was pleased. Now to find a quality leather holster, that is the hard part.

Sent from my SM-G981U using Tapatalk

 

[avvidclif]

It's a bighorn tl3 action with a bartlien 7 twist barrel finished at 28" sitting in a mdt acc chassis. Running a jewel trigger and a schmidt and bender pmii scope. Not sure what barrel life will be but I suspect somewhere in the 2500-3000rds. Its only running 30gr of varget which pushes the 110's at 2807fps. Here's a pic of the kiddo with it dry firing before she started running it.

Sent from my SM-G965U using Tapatalk

Excellent form, left hand supporting butt and good cheek weld. Turn her loose at 500 yds and smile real big.

 

[shooterfpga]

It's a bighorn tl3 action with a bartlien 7 twist barrel finished at 28" sitting in a mdt acc chassis. Running a jewel trigger and a schmidt and bender pmii scope. Not sure what barrel life will be but I suspect somewhere in the 2500-3000rds. Its only running 30gr of varget which pushes the 110's at 2807fps. Here's a pic of the kiddo with it dry firing before she started running it.

Sent from my SM-G965U using Tapatalk

How do you like the mdt acc? I was going to buy one but got a really good deal on an xlr envy pro with all the extras. Ive been running xlr forever just wish theyd move to a thumbwheel adjuster on the butt stock.

Sent from my SM-N970U using Tapatalk

 

[dee]

How do you like the mdt acc? I was going to buy one but got a really good deal on an xlr envy pro with all the extras. Ive been running xlr forever just wish theyd move to a thumbwheel adjuster on the butt stock.

Sent from my SM-N970U using Tapatalk

I'm somewhere on the fence about it. I've always been a traditional type vertical grip stock fan. This thing offers tons of adjustments and it's pretty quick at that. The absolute only complaint I have is if the bipod is all the out it hops really bad but I don't have the entire weight system on it like most run. My understanding is the external weight kits mitigate that.

Sent from my SM-G965U using Tapatalk

 

[shooterfpga]

I'm somewhere on the fence about it. I've always been a traditional type vertical grip stock fan. This thing offers tons of adjustments and it's pretty quick at that. The absolute only complaint I have is if the bipod is all the out it hops really bad but I don't have the entire weight system on it like most run. My understanding is the external weight kits mitigate that.

Sent from my SM-G965U using Tapatalk

Yeah i tried one with weights and it was planted solid. Im 50/50 on whether i like the weights right now.

Also werent you shooting a dasher before? I know it was a 6mm of some kind.

Sent from my SM-N970U using Tapatalk